Ricoh MP301SPF Copier Setup & Use

a. Connect one end of the Ethernet cable to the USB-to-Ethernet adapter
b. Plug the other end of the Ethernet cable into the network jack on the copier. This jack should be near the back on the left-hand side of the copier
c. Connect the USB end of the USB-to-Ethernet adapter into one of the USB ports on the right-hand side of your laptop

a. Put your document to be scanned in the Automatic Document Feeder (ADF) face-up on the top of the copier
b. Press the Scanner function button to the left of the display, or hit the Home button and select it from the display itself
c. The system should default to scanning to a folder
d. Press the "Select Destination from Address Book" button in the lower left-hand corner of the screen
e. The destination called Scans should be listed. Select this destination by pressing on its name. The button color should change indicating that you have selected it
f. Press the green Start button in the lower right-hand corner of the keypad
g. The scanned document should show up in the Scans folder in the Ricoh301Scans folder inside the Applications folder on your desktop

The Ricoh MP301SPF copier is setup identically for all of the realty offices that are using them. This means that if you move from one realty office to another you will not need to do anything other than connect the copier to your laptop using the USB end of the USB-to-Ethernet adapter. Please make sure you always leave the supplied Ethernet cable and USB-to-Ethernet adapter with the copier in the office.
If you go back and forth between a realty office and an FFL branch or LPO office you will need to change your default printer to reflect which office you are in. Contact IT if you need assistance with this.